澳门生肖号码表
当前位置:首页-新闻资讯

铝卷产品在生产线上的加热方式

来源:/ 发布时间:2023-01-29

铝卷是建筑、机械等行业中非常常用的一种材料,具有耐腐蚀、耐热、美观性高等特点。那么该产品在生产线上的加热方式都有哪些呢?铝卷生产厂家为您介绍:
Aluminum coil is a very common material in construction, machinery and other industries. It has the characteristics of corrosion resistance, heat resistance, beauty and so on. What are the heating methods of the product on the production line? The aluminum coil manufacturer introduces to you:
1、电加热。电能作为一种干净的能源在很多方面都表现出了方便等优势,电能至少有四个方面的优势:
1. Electric heating. As a clean energy, electric energy has shown advantages of convenience in many aspects, including at least four advantages:
(1)使用方便。电能在传输方面的优势使得电加热的速度大大提高,有些依*电能做能源的加热方式甚至不需要经过预热过程,如红外加热的方式。这样一来可以提高铝材的生产效率和线速度,缩短固化时间,传统的燃气方式很难满足快速固化的要求,而利用红外、近红外、电感、光电手段等电加热技术,可将涂料的固化时间缩短到3-15秒,这类技术在高速的生产线中已经得到广泛的应用。
(1) Easy to use. The advantage of electric energy in transmission has greatly improved the speed of electric heating. Some heating methods based on electric energy do not even need to go through the preheating process, such as infrared heating. In this way, the production efficiency and linear speed of aluminum can be improved, and the curing time can be shortened. The traditional gas method is difficult to meet the requirements of rapid curing. However, the curing time of coating can be shortened to 3-15 seconds by using infrared, near-infrared, inductive, photoelectric and other electric heating technologies, which have been widely used in high-speed production lines.
(2)符合可持续发展的要求。燃气加热所消耗的是不可再生能源,而电能来源很广,在一定程度上属于再生能源。
(2) Meet the requirements of sustainable development. Gas heating consumes non-renewable energy, while electric energy is from a wide range of sources and belongs to renewable energy to a certain extent.

铝卷生产厂家
(3)投资规模小。燃气加热法要投入相应的储气设备、燃烧设备、净化设备及相关的安全设备,一次性投入大,而电能的投资就很小。
(3) The investment scale is small. The gas heating method requires the investment of corresponding gas storage equipment, combustion equipment, purification equipment and related safety equipment. The one-time investment is large, while the investment of electric energy is small.
(4)干净卫生。使用电能加热可以解决废气问题,铝卷生产线产生的尾气可以经过焚烧处理,产生的能源可以作为其他用途,从而解决生产线的环保问题。
(4) Clean and sanitary. The use of electric energy heating can solve the problem of waste gas. The tail gas generated by the aluminum coil production line can be incinerated, and the energy generated can be used for other purposes, thus solving the environmental protection problem of the production line.
2、燃气加热。燃气加热是目前应用较多的方式,主要使用天然气、煤气等燃料。该种方式更加经济,且生产过程中的尾气也可以回收利用。缺点是污染大、升温速度慢、安全性差。
2. Gas heating. Gas heating is currently widely used, mainly using natural gas, gas and other fuels. This method is more economical, and the tail gas in the production process can also be recycled. The disadvantages are large pollution, slow heating speed and poor safety.
(1)污染大主要表现为生产线本身要产生很多的尾气,使用燃气方式加热不可避免地会产生废气;
(1) The major pollution is that the production line itself will produce a lot of exhaust gas, and the use of gas heating will inevitably produce exhaust gas;
(2)升温速度慢主要是燃气加热要有个预热过程;
(2) The slow heating rate is mainly due to the preheating process of gas heating;
(3)安全方面,由于燃气加热会产生明火,而生产线上大多是有机溶剂,这些明火一定程度上会对生产线的安全性构成潜在危险。
(3) In terms of safety, due to the open fire generated by gas heating, and most of the production lines are organic solvents, these open fires will pose a potential risk to the safety of the production line to a certain extent.
以上是对于铝卷生产线加热方式的介绍,你都了解了吗?如果您有相关需要的话,可以来电订购
The above is an introduction to the heating method of the aluminum coil production line. Do you understand it? If you have relevant needs, you can call to order 。