听到花纹的铝板这个名字，我们就相信它是外观上有花纹的铝制金属板材，可是通常同样的事情并不像我们听到或看到的那么简单。 那么，花纹铝板到底有什么样的简单的地方，各自有什么样的用途，还有应该怎样保护装置呢

When we hear the name aluminum plate with patterns, we believe it is an aluminum metal plate with patterns on its appearance, but usually the same thing is not as simple as what we hear or see. So, what are the simple aspects of patterned aluminum plates, what are their respective uses, and how should they be protected

第一，花纹铝板非常简单。 首先，在铝制板材上制作规则图案并不简单。 这意味着加工中有很多工序，不仅机械设备的投入，还花费了更多的劳力。

Firstly, patterned aluminum panels are very simple. Firstly, making regular patterns on aluminum sheets is not easy. This means that there are many processes in the processing, which not only involve the investment of mechanical equipment, but also require more labor.

二、加工，优质铝合金防滑板，加工精细，安装精密，密封性能好，开关自如。 劣质铝合金门窗，盲目选用铝型材系列和规格，加工粗制造，用锯切割，代替铣削加工，不按要求安装，密封性能差，开关不方便，不仅有漏雨和玻璃爆炸现象，还遇到强风和外力，推拉部分和玻璃脱落

2、 Processing, high-quality aluminum alloy anti-skid plate, precision processing, precise installation, good sealing performance, and easy opening and closing. Poor quality aluminum alloy doors and windows, blind selection of aluminum profile series and specifications, rough manufacturing, sawing and cutting instead of milling, not installed according to requirements, poor sealing performance, inconvenient opening and closing, not only experiencing rain leakage and glass explosion, but also encountering strong winds and external forces, sliding parts and glass detachment

合金铝板也是金属材料，日常运用过程中需要用科学的方法保护。 顶部、定时清洗、外观污垢用清水或相应的除污剂清洗，污垢的其馀部分使用简单形成板材腐蚀变形的专业喷雾剂涂层板材外观，在图案的铝板上形成多个屏障可以避免腐蚀，另一方面，具有美观装饰的效果，因此得到运用

Alloy aluminum plates are also metal materials, and scientific methods are needed to protect them during daily use. The top, regular cleaning, and appearance dirt shall be cleaned with clean water or corresponding detergent. The rest of the dirt shall be coated with professional spray agent that can simply form the corrosion deformation of the plate. The formation of multiple barriers on the aluminum plate with patterns can avoid corrosion. On the other hand, it has the effect of aesthetic decoration, so it is used

合金铝板从价格来看，一般优质的铝合金防滑板生产成本高，因此价格比劣质的铝合金防滑板高30%左右。 目前，加工铝合金防滑板的个人用户较多，不知道铝合金防滑板的结构特点和性能。 为了降低成本放手减少材料，其次充实，产品危险大，不宜一般采用。 请选择正规铝合金防滑板制造商的产品。

In terms of price, high-quality aluminum alloy skateboards generally have high production costs, so the price is about 30% higher than low-quality aluminum alloy skateboards. At present, there are many individual users who process aluminum alloy skateboards and are unaware of the structural characteristics and performance of aluminum alloy skateboards. In order to reduce costs, let go of reducing materials, and secondly enrich the product. The product is dangerous and not suitable for general use. Please choose products from reputable aluminum alloy skateboard manufacturers.

微加工材料预处理工艺中应注意的问题:微加工材料先生成表面自然氧化膜，容易去除，但油渍的重量，尤其是眼睛及其周围，此类工件必须先用有机溶剂清洗。 直接用碱洗不仅难以去除油渍的重量，而且微加工面不能承受长时间的强碱腐蚀，结果影响到工件表面的粗糙度和公差的配合，终有可能成为废品。

Attention should be paid in the pre-treatment process of microfabrication materials: The surface of microfabrication materials is naturally oxidized and easy to remove, but the weight of oil stains, especially around the eyes, must be cleaned with organic solvents first. Directly using alkaline washing not only makes it difficult to remove the weight of oil stains, but also the micro machined surface cannot withstand long-term strong alkaline corrosion, which affects the roughness and tolerance of the workpiece surface and may eventually become waste.

合金铝板制品广泛应用于汽车、建筑等行业，提高铝制品质量是企业生存的根本存在，铝质材料在空气中极不稳定，易产生肉眼难以识别的氧化膜。 铝材加工方法的不同，例如铸造成形、从轧制板材直接剪切的、机械微细加工的、或者通过不同的加工成形后进行热处理或焊接等，工件表面呈现不同的状态，存在某种程度的污垢或痕迹，因此在前处理工序中根据工件表面的实际情况选择前处理的方法。

Alloy aluminum plate products are widely used in industries such as automobiles and construction. Improving the quality of aluminum products is the fundamental survival of enterprises. Aluminum materials are extremely unstable in the air and are prone to producing oxide films that are difficult to recognize with the naked eye. The different processing methods of aluminum materials, such as casting, direct cutting from rolled sheets, mechanical micro processing, or heat treatment or welding after different processing and forming, result in different states on the surface of the workpiece, with some degree of dirt or marks. Therefore, in the pre-treatment process, the pre-treatment method is selected based on the actual situation of the workpiece surface.

本文由铝板生产厂家提供技术支持，更多的详细精彩内容请点击我们的网站，我们将会全心全意为您提供满意的服务。

This article is supported by aluminum plate manufacturers. For more detailed and exciting content, please click on our website We will wholeheartedly provide you with satisfactory service.