来源:/ 发布时间:2017-12-08
1、擦拭灰尘:
1, wipe the dust:
虽然不容易沾染到灰尘是拉丝铝板的一大优势,它的另一较大的优势就是特别的好打理。毕竟我们生活的空间充满了灰尘,拉丝铝板上的灰尘只需用抹布轻轻的擦拭就可以光亮如新。不要让过多的水分长时间停留在拉丝铝板上,这样对铝板是很不利的。
Although it is not easy to contaminate the dust is a great advantage of the drawing aluminum plate, the other big advantage is the special good reason. After all, the space of our life is filled with dust, and the dust on the drawing aluminum plate can be just as bright as the cloth is wiped gently. Do not let too much water stay on the drawing aluminum plate for a long time, which is very bad for the aluminum plate.
2、表面粘胶:
2. Surface viscose:
如果铝板表面上有黏胶,比如一些标签撕下去后就会有滞留下黏胶,这时候千万不可以用小刀等利器去刮。如果您能确定您使用的产品材质较好,用普通的橡皮就可以擦掉。如果材质较差,用橡皮会越擦越花,这时您可以用吹风机的热风对着黏胶吹一会,然后就可以很轻松的用布把赃物擦下来。
If there is glue on the surface of aluminum, such as some label torn down after the delay will leave glue, do not use this knife to scrape a weapon. If you can make sure that the product you use is better, it can be erased by ordinary rubber. If the material is poor, with a rubber will wipe the flowers, then you can use the hair dryer to blow the hot glue for a while, then you can easily use a cloth to wipe off dirt.
3、焊接烤糊脏污:
3. Grilled paste in welding:
有时候铝板经过焊接后,表面会留下一层类似于烤糊了的脏污,这时候普通的清理方法就难以达到清洗的效果。这时您需要在脏污处撒上一些干面粉只需轻轻一擦就可搞定。
Sometimes after the aluminum plate is welded, the surface will leave a layer of dirty dirt that is similar to the baked paste. This time the common cleaning method is difficult to achieve the effect of cleaning. At this time you need to sprinkle some dry flour on the dirty place.
4、发黑处理:
4. Blackening treatment:
遇到雨水是不会变黑的,除非是含有酸性比较大的雨水的时候,长时间侵蚀就会发黑了。但就算是发黑也基本上在使用很多年后才会发黑,因此一般是不会发黑的,但是我们平时也要进行清洗和擦拭。有的家庭当中由于使用不当或者一些其他的因素导致铝板发黑了,这时候用普通抹布是擦拭不掉的,但是大家不用着急,我们可以通过酒精进行擦拭,或者是有的铝板清洗剂轻轻一擦就可以了。
The rain will not be black, unless it contains a relatively large amount of acid rain, long time erosion will be blackened. But even if it is black, it is basically black after years of use, so it is generally not black, but we usually have to clean and wipe. Some families because of improper use or some other factors lead to aluminum blackening, this time with ordinary cloth is wipe away, but we need not worry, we can wipe through alcohol, or there is a professional aluminum cleaner gently rub on it.