铝板它在我们生活中的使用是很广泛的，但是对于铝板还有很多行外的人不是很了解，铝板它进行加工的时候会经常出现浪费的现象，难免会出现浪费的情况，下面铝板生产厂家就向大家介绍下：怎么减少铝板不必要的浪费呢？
Aluminum plate is widely used in our life, but many people outside the industry do not know about aluminum plate very well. When aluminum plate is processed, waste often occurs, which is inevitable. The following aluminum plate manufacturer will introduce to you: How to reduce unnecessary waste of aluminum plate?
1.揉捏调直环节
1. Kneading and straightening link
调直这个环节，比较简略让型材产生曲折，操作员必定要注意调直所用的力度，假定力度过大就，或许型材就简略产生变形、收口、桔皮等现象，而力气过小就会产生型材调不直，构成型材曲折。
Straightening is a relatively simple link, which makes the profile zigzag. The operator must pay attention to the force used for straightening. If the force is too large, the profile may be slightly deformed, necked, orange peel and other phenomena, while if the force is too small, the profile will not be straightened, forming a profile zigzag.
2.揉捏装框
2. Kneading and framing
这个环节也是非常重要的，锯完定尺长度后，一般铝板就要进行装框了，这时应该要注意了：这料是大料仍是小料，是带管料仍是平面模拉出来的料。
This link is also very important. After sawing the fixed length, the aluminum plate will be framed generally. At this time, it should be noted that this material is large or small, with tube or plane die.

一般来说，大料和带管的料抬两头装框不简略构成曲折，但小料和平面模拉出来的料，抬两头就很简略构成曲折，这时就应该从两头向中心挨近进行抬料装框。但有的型材即便这样还不可，这时咱们就需要把这类料放在已时效的型材上再抬到框里。
Generally speaking, it is not simple to frame large materials and materials with tubes by lifting both ends, but it is simple to frame small materials and materials pulled out by plane die by lifting both ends. At this time, it should be carried out from both ends to the center. But even if some profiles are not available, we need to put such materials on the aged profiles and then lift them into the frame.
3.表面处理上架
3. Surface treatment shelf
坯料经时效，硬度已达标，型材不会那么容易变弯曲，但是在上架时还是要注意，两端抬料时，尽量避免上下大力波动，避免铝板出现弯曲的情况。
After aging, the hardness of the blank has reached the standard, and the profile will not be so easy to bend. However, attention should be paid to when putting the blank on the shelf. When lifting the material at both ends, try to avoid strong fluctuation up and down to avoid bending of the aluminum plate.
上述就是关于怎么减少铝板不必要的浪费呢？通过上述的介绍相信大家也详细了解了，希望上述的分享可以帮到大家。更多相关信息就来我们网站进行咨询吧！
The above is about how to reduce the unnecessary waste of aluminum plate? Through the above introduction, I believe you have also understood in detail. I hope the above sharing can help you. Come to our website for more information Consult!