铝卷是一种很常用的铝制品，在各行各业都可以看到它的身影，那么该产品在进行涂层施工的时候都有哪些方法呢？下面铝卷生产厂家来为大家分享一下吧。
Aluminum coil is a very common aluminum product, which can be seen in all walks of life. What are the methods for coating this product? Let's share with you the following aluminum coil manufacturers.
1、浸涂
1. Dip coating
浸涂是一种传统的涂装方法。该方法将被涂物浸没在盛有涂料的槽液中，随即取出，让多余的涂料滴落回槽液中，或采用机械方法将多余的涂料甩落。该方法的溶剂损失较大，容易造成空气污染，不适用于挥发性涂料，且涂膜的厚度均匀，一般用于结构复杂的器材或工件。
Dipping is a traditional coating method. In this method, the coated material is immersed in the bath containing paint, and then taken out immediately to let the excess paint drop back into the bath, or the excess paint is thrown off mechanically. This method has large solvent loss and is easy to cause air pollution. It is not suitable for volatile coatings, and the film thickness is uniform. It is generally used for equipment or workpieces with complex structures.
2、刷涂
2. Brushing
刷涂是使用较早，也较为简单和传统的手工涂装方法，操作方便、灵活，可涂装任何形状的物件，除干性快、流平性差的涂料外，可适用于各种涂料。刷涂法可使涂料渗透金属表面的细孔，加强涂膜对金属的附着力。缺点是劳动强度大、工作效率低、涂布外观欠佳。
Brushing is an early, simple and traditional manual painting method, which is easy and flexible to operate. It can be used to paint objects of any shape. It is applicable to all kinds of coatings except for those with fast drying and poor leveling. The brushing method can make the coating penetrate the pores on the metal surface, and strengthen the adhesion of the coating film to the metal. The disadvantages are high labor intensity, low work efficiency and poor coating appearance.

3、喷涂
3. Spraying
喷涂是利用压缩空气在喷枪嘴产生的负压将涂料容器中的涂料从涂料喷嘴喷出，并快速进入高速的压缩空气流，以雾状微粒射向被涂物，使其均匀涂布在铝材表面，具有涂膜厚度均匀、外观平整、生产效率高的优点。但铝卷厂家要提醒您的是，这种方法的材料损耗远大于刷涂和淋涂等方法，且使用溶剂性涂料时会造成环境污染，因此大家要谨慎使用。
Spraying is to use the negative pressure generated by the compressed air at the nozzle of the spray gun to spray the coating in the coating container from the coating nozzle, and quickly enter the high-speed compressed air flow to shoot the coated object with aerosol particles, so that it can be evenly coated on the aluminum surface. It has the advantages of uniform film thickness, flat appearance, and high production efficiency. However, the aluminum coil manufacturer should remind you that the material loss of this method is far greater than that of brushing and spraying, and the use of solvent based coatings will cause environmental pollution, so you should be cautious.
4、刮涂
4. Scraping
刮涂是使用刮刀进行涂装的方法，适用于黏度较高、固体含量高的液态涂料的涂装。刮涂作业涂膜的常见缺陷是开裂、脱落、翻卷等，其涂膜的厚度也很难均匀。
Scraping is a method of coating with scraper, which is applicable to the coating of liquid paint with high viscosity and high solid content. The common defects of the coating film in scraping operation are cracking, falling off, roll over, etc. The thickness of the coating film is also difficult to be uniform.
5、淋涂
5. Drenching
淋涂是将涂料从喷嘴喷淋至被涂物表面，涂料经过自上而下的流淌将被涂物表面完全覆盖后形成涂膜的涂装工艺工程。此法所用设备简单，比较容易实现机械化生产，且操作简便、生产效率高，但存在涂膜不平整、覆盖不完整、涂膜厚度均匀等缺陷，而且淋涂比浸涂的溶剂消耗量更大，也存在一定的安全和污染问题。
Spraying is a coating process that sprays the coating from the nozzle to the surface of the object to be coated, and the coating completely covers the surface of the object to be coated by flowing from top to bottom. The equipment used in this method is simple, it is relatively easy to realize mechanized production, and it is easy to operate and has high production efficiency. However, there are defects such as uneven film, incomplete coverage, uniform film thickness, etc. Moreover, the solvent consumption of spray coating is higher than that of dip coating, and there are also some safety and pollution problems.
以上是厂家为您总结的铝卷涂层的施工方法，希望可以对您有所帮助。我公司是的铝制品生产厂家，产品质优价廉，售后无忧，您可以来我们网站咨询看看！
The above is the construction method of aluminum coil coating summarized by the manufacturer for you. I hope it can be helpful to you. Our company is a professional manufacturer of aluminum products, with excellent quality and low price. You can visit our website Consult!