铝卷的加工并不是直接按照图纸一次生产完全，直接交给施工方。而是在一批货物生产完成后，先由施工人员进行安装，安装结束后再进行下一批的生产加工。这样一来就要求厂家在加工保温铝卷时不能有太大的误差，因为加工时的一个小小的误差都会对后续的产品施工产生很大的影响。因此铝卷的加工应选择可靠的厂家，这不仅是对产品质量的保证，同时也可以确保施工进度的顺利推进。
The processing of aluminum coil is not directly produced at one time according to the drawings, but directly handed over to the construction party. Instead, after the production of a batch of goods is completed, the construction personnel shall install it first, and then carry out the production and processing of the next batch after the installation. In this way, the manufacturer is required not to have too much error in processing the thermal insulation aluminum coil, because a small error in processing will have a great impact on the subsequent product construction. Therefore, reliable manufacturers should be selected for aluminum coil processing, which not only ensures the product quality, but also ensures the smooth progress of construction progress.
1、保温铝卷应按管道保温层外圆周加30毫米的搭接长度进行切割，搭接宽度为30毫米；
1. The insulation aluminum coil shall be cut according to the outer circumference of the pipe insulation layer plus the overlapping length of 30mm, and the overlapping width is 30mm;
2、在卷绕机上形成保温铝皮，然后在压边机上进行周向和横向压边成形；
2. The thermal insulation aluminum sheet is formed on the winding machine, and then the circumferential and transverse blank holder forming is carried out on the blank holder;
3、保护层应靠近保温层并与保温层为一体；

3. The protective layer shall be close to the insulation layer and integrated with the insulation layer;
4、按照规定的“三距”间距，在压边圈附近用自攻螺钉（或自攻铆钉）横向固定；
4. Fix laterally with self tapping screws (or self tapping rivets) near the blank holder according to the specified "three distance" spacing;
5、使用自攻螺钉后，绝缘铝线圈表面平整无凹凸；
5. After using self tapping screws, the surface of insulated aluminum coil is flat without concave convex;
6、铝卷的保护层紧贴绝缘层，搭接宽度符合规定要求；
6. The protective layer of aluminum coil shall be close to the insulating layer, and the overlapping width shall meet the specified requirements;
7、整体美观，圆心在同一条线上，大小一样；
7. The whole is beautiful, the center of the circle is on the same line and the size is the same;
8、纵向和横向都有压边圈。
8. Both longitudinal and transverse blank holder rings are provided.
我们一直在坚持分享的路上铝卷生产厂家真正为您解决您所需要的问题.
We have been insisting on sharing with aluminum coil manufacturers Truly solve the problems you need