一般来说，光靠加工就能修复和调整铝卷铝板的形状，但是不能从根本上改变整个铝卷铝板的形状。因此，原铝卷铝板的形状直接影响成品铝卷铝板的形状和尺寸精度，以及铝卷铝板的质量和产品水平板面，那么大家知道具体的影响因素是什么吗?对此了解多少呢?是不是不清楚呢?没关系，接下来 铝卷生产厂家将为大家介绍一下。
Generally speaking, the shape of aluminum coil plate can be repaired and adjusted only by processing, but the shape of the whole aluminum coil plate cannot be fundamentally changed. Therefore, the shape of the original aluminum coil plate directly affects the shape and dimensional accuracy of the finished aluminum coil plate, as well as the quality of the aluminum coil plate and the horizontal surface of the product. Do you know the specific influencing factors? How much do you know? Is it not clear? It doesn't matter. Next, the aluminum coil manufacturer will introduce it to you.
(1)合金状态对平整度的影响
(1) Effect of alloy state on flatness

一般来说，铝合金的硬度越大，在精整过程中控制和调整铝带的形状就越困难。铝板带材精加工人员在控制和调整铝板带材时，应与前一道工序控制人员和横切精加工操作人员配合。
Generally speaking, the greater the hardness of aluminum alloy, the more difficult it is to control and adjust the shape of aluminum strip in the finishing process. When controlling and adjusting the aluminum plate and strip, the finishing personnel should cooperate with the previous process control personnel and cross cutting finishing operators.
在作出科学合理的判断后，应选择合适的手段矫直铝带钢板的板形。如果无法生产铝带板，铝带板板形的调整和控制应从调整张力、托辊位置等处开始，并加强相关部件的调整。
After making scientific and reasonable judgment, it is necessary to choose appropriate means to straighten the shape of aluminum strip and steel plate. If it is impossible to produce aluminum strip sheet, the adjustment and control of aluminum strip sheet shape should start from adjusting tension, idler position, etc., and strengthen the adjustment of relevant parts.
 铝卷生产厂家
Aluminum coil manufacturer
(2)机组安装等级和质量对铝板带材形状的影响
(2) Influence of installation grade and quality of unit on shape of aluminum plate and strip
铝卷厂家表示精整设备的安装等级将直接影响铝带的形状，安装等级由当地投资政策和铝带精整过程的投资成本决定。列车的安装质量应基于列车和设备中间线之间的垂直度。
Aluminum coil manufacturers said that the installation level of finishing equipment will directly affect the shape of aluminum strip, and the installation level is determined by the local investment policy and the investment cost of aluminum strip finishing process. The installation quality of the train shall be based on the perpendicularity between the middle line of the train and the equipment.
(3)矫直机辊位对铝带形状的影响
(3) Influence of straightener roll position on aluminum strip shape
目前，矫直机在精整过程中矫直铝带板时，辊位的水平度不够，主要是由于生产过程中调整辊位造成的。在辊更换调整过程中，上辊和下辊的水平度可能同时不够，或者上辊和下辊之一可能不够。上下辊的水平度不足可能会在拉直的铝带板上造成双面边缘波或单面边缘波板面。
At present, the leveling of the roller position is not enough when straightening the aluminum strip in the finishing process, mainly due to the adjustment of the roll position in the production process. In the process of roll replacement and adjustment, the levelness of the upper roll and the lower roll may not be enough at the same time, or one of the upper roll and the lower roll may not be enough. Insufficient levelness of upper and lower rolls may cause double edge wave or single edge wave on the straightened strip.
带材偏差也是影响铝带不良形状的原因之一。因此，操作人员应经常检查矫直机的水平度，以确保在实际精整过程中有效控制铝板和铝带的形状。
Strip deviation is also one of the reasons that affect the bad shape of aluminum strip. Therefore, operators should often check the levelness of the straightener to ensure that the shape of aluminum plate and strip is effectively controlled in the actual finishing process.
铝卷厂家在上文中介绍了一下铝卷铝板板形的影响因素，相信大家看完之后会对此有新的认识和了解，如若想要了解更多的内容，可以多多关注我们的网站： 希望能够帮助到大家。
Aluminum coil manufacturers have introduced the influencing factors of aluminum coil shape above. I believe you will have a new understanding after reading it. If you want to know more, you can pay more attention to our website:  Hope to help you.